Home             About Us             Applications             Literature             Videos             News             Contact Us

Tube & Pipe
Benders

Pines i-Line CNC Benders
CNC 025 (25 mm Capacity)
CNC 040 (40 mm Capacity)
CNC 075 (75 mm Capacity)
CNC 100 (100 mm Capacity)
CNC 150 (150 mm Capacity)

Pines i-Line NC Benders
No. 1 (40 mm Capacity)
No. 2 (75 mm Capacity)
No. 3 (120 mm Capacity)
No. 4 (150 mm Capacity)
No. 6 (219 mm Capacity)

Pines Heavy Duty Hydraulic
Rotary NC Benders
No. 0.75 (40 mm Capacity)
No. 1 (40 mm Capacity)
No. 1.25 (75 mm Capacity)
No. 2 (75 mm Capacity)
No. 4 (150 mm Capacity)
No. 6 (200 mm Capacity)
No. 8 (250 mm Capacity)
No. 10 (300 mm Capacity)

Pines Heavy Duty
CNC Pipe Benders
CNC 060HD (60 mm Capacity)
CNC 090HD (90 mm Capacity)
CNC 115HD (115 mm Capacity)
CNC 170HD (170 mm Capacity)
CNC 250HD (250 mm Capacity)

Pines CNC Tube Benders
CNC 040 (40 mm Capacity)
CNC 075 (75 mm Capacity)
CNC 090 (90 mm Capacity)
CNC 120 (120 mm Capacity)
CNC 150 (150 mm Capacity)
CNC 200 (200 mm Capacity)

Pines Portable Electric
Table Top Benders
CNC 10 Coaxial Cable Bender
CNC 15 CNC Tube Bender

Pines/Gregson
Induction Benders
2"-8" / 2"-10" / 2"-12" / 2"-16"
8"-24" / 10"-30" / 12"-36"
16"-42" / 20"-62"

Pipe Bender Rebuilds
(Models In Stock)

---

Pipe & Bar
Chamfering Machines

Single End
Pines 660
(Up to 2" [52 mm] Capacity)
Pines i-Line KM 52 AD
(Up to 2" [52 mm] Capacity)
Pines i-Line KM 110 AD
(Up to 4.1" [110 mm] Capacity)
Pines i-Line KM 150 AD
(Up to 6" [150 mm] Capacity)

Double End
Pines i-Line SA
(3" [75 mm] Capacity)
Length Ranges up to 2500 mm

Pines Gregson Induction Benders

---

Pines Gregson Induction Bending machines can process a wide range of materials and with minimum tooling cost. They can be adapted to process structural shapes such as angles, channels and beams. The 8", 10", 12" and 16" range can produce left or right bends. All others are standard left hand bends.

Our induction bending machines are portable and can be manufactured to meet your needs. All machines are backed up with a one year service warranty. Installation of the equipment and operator training are available.

For more information about Pines Gregson Induction Benders, click here.

 

---

Technical specifications:

Please note that all dimensions are subject to customer requirements and should be used as a general guide only.

Dimension "A" can vary depending on transformer assembly used.

8",10",12", and 16" machines can bend both left and right hand , 24", 30" and 36" standard left hand as illustrated.

Standard Machine Range: 2"-8"/ 2"-10" / 2"-12" / 2"-16" 8"-24" / 8"-24" / 10"-30" / 12"-36"

Non-Standard Range: 16"-42" / 20"-62"

Standard Machine	Dimensions
Size	A		B		C		D
	Inch	mm	Inch	mm	Inch	mm	Inch	mm
2"-8"	100	2540	140	3556	40	1016	124	3150
2"-10"	110	2794	160	4064	50	1270	134	3404
2"-12"	115	2921	180	4572	60	1524	144	3657
2"-16"	120	3048	220	5588	80	2032	164	4166
8"-24"	130	3302	186	4724	120	3048	324	8230
10"-30"	145	3683	216	5486	150	3810	384	9754
12"-36"	156	3962	260	6604	180	4572	468	11887

 

---

induction bending machine Options:

• Third Roller Mechanism for long radius bends
• The facility to bend left or right hand on machines from 24" to 62"
• Push mandrels to accommodate standard and non-standard pipe

 

---

Advantages of Induction Bending:

Induction bending like many engineering ideas, owes its success to its simplicity and effectiveness. It operates on the principle of heating material by the eddy current effect of an induced electrical current, a technique which, of course, has been in use for many years. Pines Gregson Induction Benders will manufacture a machine based on your requirements. We have a range of products that can handle from 2"-62" pipes.

Save time – Induction bending does not require any sand filling or internal mandrels. The bending times are considerably less than in fire bending or weld fabrication, making the process cost effective.

Cut production costs – Time is money, and cutting down on production and inspection time saves you money.

Improve quality – The quality of the bends with respect to surface finish are equal to that of cold bending, better than fire bending, and in the case of ovality and wall thinning, are superior. As the process eliminates the need for welded or mechanical joints between bends, the integrity of the finished pipework is higher than in any other process.

Flexibility – The bend radius is infinitely variable from 2D centre line radius to infinity. Wall thickness can vary from Schedule 5 up to 2.5" thick with no alteration to the machine's tooling.

More Advantages of Induction Bending …

 

TOP

Tube & Pipe
Bending Tooling

Tooling
Tooling - Competitive Machines
Stocked Mandrel Components

---

OEM Machine
Control Upgrades

NC & CNC Controls
Pines TS2000 CNC Control

---

Services

Leasing
Service Contracts
Trade Ins
Rebuild Services
Phone Support
Field Service & Charges
Replacement Parts
Legacy Machines

---

Vendors

Terms & Conditions
Conditions of Sale
Tax Exempt

---

Employment

Job Opportunities